Do you want to provide maximum security for your home or business? The best option for you is video surveillance. CCTV camera systems are still developing with increasing concern in our daily life to measure the protection of personal property.
Now almost everyone keeps their homes and businesses safe with the installation of video surveillance. However, in many cases, even if they want to use video surveillance, they don’t know how to install it. This is a common problem for many people.
Do you know how to install a CCTV camera? If you don’t know, this article may be most helpful to you. For your convenience, we will now describe some guidelines that you can install CCTV by following quickly. So let’s get started.
Step 1:
First, unpack the video surveillance box and remove all the components from the packaging. You must now determine which part is used for which purpose. Put everything in a box on a flat surface. An initial visual presentation in a sophisticated product kit will help you a lot to familiarize yourself with the content of the product before installing your product.
With this kit, you will get four high definition analog cameras. Each camera requires a power source and cables for the DVR connection. The camera and cables may need to be placed together. This will be more convenient once you start connecting the electricity and cables.
2nd step:
Now use the power cable and keep it connected to the DC-12V interface on the back of your DVR on one side. Connect the top edge directly to the power source on the other side. You will now notice the indicator light next to the Ethernet interface!
Connect the USB mouse to one of the USB interfaces as a monitor control tool. The back of this Florian AHD DVR has two USB 2.0 and interfaces so that it works simultaneously with monitor control, USB backup and a wireless network card in a total of three.
Now in the last step of the monitor, you can use the VGA interface or the HDMI interface. The VGA connector is a three-row, 15-pin DE-15 connector that is commonly found on many video cards, computer monitors, and high-definition TVs. On the other hand, the HDMI interface allows you to enjoy standard, enhanced or high definition video and multi-channel digital audio over a single cable.
Step 3:
You can use all video input and output interfaces using the BNC interface, and the coaxial cable uses the BNC connector instead of the current RCA connection. You will also need to check the CCTV camera at this point. You can proceed to the test stage after mounting your camera on the wall or ceiling to complete your home video surveillance solution.
You can use CCTV test monitors when you find signal transmission failures when you finish mounting your cameras on the ceiling or wall. You can also locate individual cameras to resolve the problem.
Step 4:
All the steps are already completed and your CCTV camera is also installed. It is ready to use. Then start using immediately.
Final thoughts:
We are trying to discuss here the process of installing a CCTV camera. If you can follow these guidelines, you can easily install it in your home or business. Hopefully this little effort will be useful to all of you.
